EFI LED VUTEK GS3250LXR Pro

Description

Like brand new. See description below:
The EFI™ VUTEk® GS3250LXr Pro LED roll-to-roll printer meets specific requirements for the production of fleet and vehicle graphics, and much more, with true grayscale print capability, high image quality, EFI VUTEk GSLXr 3M™ SuperFlex UV Ink and the power of LED.
SuperFlex Your Business With LED Roll-to-Roll Printing
Produce fleet and vehicle graphics at 1,600 square feet (149 square meters) per hour in 600 dpi, grayscale and light smoothing mode
Print on a wide range of flexible substrates with fewer process steps
Produce high-margin, closely viewed graphics with six colors and true variable-drop grayscale print capability
Get better results with EFI VUTEk GSLXr 3M™ SuperFlex UV Ink that exhibits solvent-like elongation characteristics and withstands heat installation without cracking
Warrant printed output with the 3M™ MCS™ Warranty when using co-branded EFI and 3M™ UV inks printing on 3M™ flexible media1
Offer an extended color gamut and ensure maximum reliability and performance with your VUTEk system
Increase up time and productivity with LED's instant on/off and less maintenance
Drive down operating costs with decreased power consumption and lower hard costs with LED
Extend the range of supported substrates with innovative LED technology
Reduce waste with consistent color output and simple operation
Satisfy customer requests for a greener print solution
Receive audit information on every print job with bi-directional communication between the Fiery® XF RIP and VUTEk system
Optimize business processes with seamless printer integration to EFI Web-to-Print and MIS solutions with native JDF connectivity
Features:
Dual resolution of true 600 dpi (24pL) or 1000 dpi (12 pL)
Six colors and grayscale print capability
Graphics printed with SuperFlex UV Ink qualifiy for the 3M™ MCS™ Warranty; vehicle graphics qual
Standard multi-queue on-demand functionality for multi-roll printing
Optional automated double-sided printing capability with simple and accurate registration for banner
Optional heavy duty unwinder (HDU) and chiller for enhanced media handling
Multiple-roll capability up to two 60 inch rolls
Fiery® proServer with Fiery XF production RIP and color management workflow
Bidirectional communication capability between the Fiery XF RIP and printer increases workflow effic
Specifications:
Media/Handling
-Handles flexible substrates up to 126.5 in. (3.2 m) wide, and .031–.125 in. (.79–3.2 mm) thick
-Multiple-roll capability — up to two 60 in. (152 cm)-wide rolls
-Maximum media weight: 400 lbs (180 kg)
-Maximum roll diameter: 14 in. (30 cm)
Productivity
-Best Quality Mode (1000 dpi, 6 color, heavy smoothing) 525 ft²/hr (49 m²/hr)
-POP Quality Mode (600 dpi, 6 color, light smoothing) 1,600 ft²/hr (149 m²/hr)
-Up to Speed (600 dpi/grayscale, no smoothing) 2,250 ft²/hr (209 m²/hr)
Environmental Considerations
Compressed Air - 95–150 psi maximum at 4 cf/m—dry air only (not included)
Temperature - 68° F to 80° F (20° C to 30° C)
Humidity - 30% to 80% (noncondensing)
Design - Fully enclosed design for operator safety and environmental considerations
Electrical Specifications
Rated Voltage - 208 or 440–480 AC
Rated Frequency - 50–60hz
Power Supply - 3–Phase, 70 amps
Dimensions and Weight
Width - 232 in. (589 cm)
Height - 69 in. (175 cm)
Depth - 66 in. (168 cm)
Weight - 6,700 lbs. (3039 kg)
Inks
EFI VUTEk GSlxr 3M™ SuperFlex UV Ink
-Supplied in 5.0-liter containers in cyan, magenta, yellow, black, light cyan, light magenta
-Flexible inks are water- and fade-resistant, contain virtually no volatile organic compounds (VOCs), are media independent and fast-drying, and reduce production time
-Fifteen-month shelf life
Software
EFI Fiery proServer
-Optimized for use with the EFI Fiery proServer
-Bidirectional communication capability between the Fiery
-Fiery XF software and printer allows back communication of audit information on every print job
-Powerful production tools such as nesting, step and repeat, scaling, cropping and tiling
-Advanced ICC color management for reliable color, quality output and proofing-quality color
Service Program
Enhanced Service Program (ESP)/strong>
-EFI’s industry-leading service and support program for your printer, Fiery proServer hardware and Fiery XF software
-Thirteen months of Essential coverage, with 24-business-hour (three-business-day) response
-Eligible for upgrade to:
-Critical: Providing eight-business-hour (one-business-day) response
-ProActive: Providing 16-business-hour (two-business-day) response