TE Cooling Sony CMOS sensor 10mp 20mp USB3.0 Cool Microscope Camera for FL & DF

Description

Sony imx294 imx183 sensor 10mp to 20mp USB3.0 Cool Microscope Camera with TE cooling temperature control
Model: MTR3CMOS
Camera Description
Feature
Standard C-Mount camera with SONY Exmor CMOS sensors imx183 or imx294
Sensor Resolution: 20MP(imx183)  10MP(imx294)
Two-stage TE-cooling (Thermo Electric Cool)
temperature controllable with electric fan;
Sensor cooling can be 42 degree below ambient temperature
(Support set lowest working temperature -30 degree)
Working temperature can be regulated to specified temperature in 5 minutes
Smart structure to assure the heat radiation efficiency and avoid the moisture problem
IR-CUT filter (AR coated windows for Opional)
Up to 1 hour long time exposure;
USB3.0 5Gbit/second interface ensuring high speed data transmission
Ultra-FineTM color engine with perfect color reproduction capability
With advanced video and image processing application RisingView
Support both video and trigger modes
Providing Windows/Linux/Mac OS multiple platforms SDK
Native C/C++, C#/VB.NET, DirectShow, Twain control API
Instruction
MTR3 CMOS camera adopts SONY Exmor CMOS sensor as the image-picking device and USB3.0 is used as the transfer interface to increase the frame rate.
With the two-stage peltier cooling sensor chip to -42 degree below ambient temperature.
This will greatly increase the signal to noise ratio and decrease the image noise. Smart structure is designed to assure the heat radiation efficiency and avoid the moisture problem.
Electric fan is used to increase the heat radiation speed.
USB3.0 is used as the data transfer interface to increase the frame rate.
MTR3 CMOScomes with advanced video & image processing application RisingView; Providing Windows/Linux/OSX multiple platform SDK; Native C/C++, C#/VB.NET,
DirectShow, Twain Control API;
The MTR3 CMOScan be widely used in low light environment and microscopefluorescence image capture and analysis, as well as the astronomy deep sky application.
Camera Application
Bright field microscope
Dark field, differential interference (DIC) microscope;
Living cell imaging, cell or histopathology, cytology;
Defect analysis, semiconductor inspection, precision measurement;
Low-light fluorescence imaging, GFP or RFP analysis, fluorescence in situ hybridization (FISH);
Fluorescence resonance energy transfer microscopy, total internal reflection fluorescence microscopy, real-time confocal microscopy, failure analysis, astrophotography
Camera Specification
Model No
Sensor& Size(mm)
Pixel(μm)
G Sensitivity
FPS/Resolution
Binning
Exposure
Dark Signal
MTR3-20000KPA
20mp/IMX183(C)
2.4x2.4
462mv with
1/30s
5fps/5440x3648
1x1
0.1ms~3600s
1 inch
0.21mv with 1/30s
10fps/4096x2160
1x1
(13.056x8.755)
15fps/2736x1824
2x2
30fps/1824x1216
3x3
MTR3-20000KMA
20mp/IMX183(Mono)
2.4x2.4
388mv with
1/30s
17.8fps/5440x3648
1x1
0.1ms~3600s
1 inch
0.21mv with 1/30s
41fps/4096x2160
1x1
(13.056x8.755)
(F8.0)
51fps/2736x1824
2x2
64fps/1824x1216
3x3
MTR3-10300KPA
10.3mp/IMX294(C)
4.63x4.63
419mv with
1/30s
7.5fps/3704x2778
1x1
0.15ms~3600s
4/3 inch
0.12mv with 1/30s
10 fps/4096x2160
1x1
(17.47x12.86)
60 fps/2048x1080
2x2
96fps/1360x720
3x3
C:Color;
Mono:Monochrome
NOTE:
SONY imx294 sensor G Sensitivity 1900mv with 1/30s under HCG mode (High Conversion Gain),
In order to let Camera get low hot noise,
RisingTech set camera working under
LCG mode (Low Conversion Gain)
,
so MTR3-10300KPA Camera's G sensitivity is 419mv
with 1/30s
OTHER HARDWARE CONFIGURATION
Spectral Range
380-650nm (with IR-filter)
White Balance
ROI White Balance/ Manual Temp-Tint Adjustment
Color Rendering Technique
Ultra Fine Color Engine
Recording System
Still Picture and Movie
Cooling System
Two-stage TE-cooling System -45C below Camera Body Temperature
OPERATING ENVIRONMENT
Operating Temperature
-10C--50C
Storage Temperature
-20C--60C
Operating Humidity
30~80%RH
Storage Humidity
10~60%RH
Power Supply
DC 5V over PC USB Port
External Power Adapter for Cooling System, DC12V, 3A
SOFTWARE ENVIRONMENT
Operating System
Support Microsoft  Windows  XP / Vista / 7 /8 /10 (32 & 64 bit)
OS X (Mac OS X), Linux (Note:  RisingView for Windows OS are Full verion as follow picture.    RisingView for MAC and Linux are Simple Version without Measurement and other  Process function)
PC Requirements
CPU: Equal to Intel Core2 2.8GHz or Higher
Memory: 2GB or More
USB port: USB2.0 High-speed Port
Display: 17 inch or Larger
CD-ROM
Camera Pictures
SONY Exmor CMOS sensors imx185 or imx294
20MP(imx183, 1inch, max 30fps)
10MP(imx294, 4/3inch, max 96fps)
The 1.2X M42 Mount adapter is best match with MTR3-10300KPA's 4/3 inch sensor,
If buyer use Nikon, Zeiss, Leica or Olympus Trinocular Microscope,
RisingTech suggest Buyers use 1.2X M42 Mount Adapter for this  4/3" sensor camera
Remove the C mount Ring from the camera, so the Camera become M42 mount camera
Install 1.2X M42 mount adapter for
MTR3-10300KPA  4/3"
Camera
Please Note:
For Other Brand Microscope User
Some small size 1X C mount adapter may block the 4/3" sens
or of
MTR3-10300KPA Camera
,
so maybe there are little black corners show in image,  if that buyer could try to buy M42 Mount adapter from your Microscope Supplier
For MTR3-20000KPA/KMA  imx183 1" Camera, 1X C mount adapter is best choice
Camera Working------MTR3-20000KMA (20mp Mono camera)  Connect to Olympus Microscope via 1X C mount adapter
The Camera can low down 42 Centi-degree than ambient temperature, the Lowest target temperature is -30 Centi-degree
Darkfield
testing
for the MTR3
Camera at Gain 20 , Exposure 600s, without Cool, hot noise image
MTR3 Camera
at Gain 20 , Exposure
600s, Turn On Cooling, Minus 15 Centi-degree, hot nosie much less
RisingView software instruction
RisingCam Provide RisingView Software for buyer free.
RisingView is professional software integratedwith camera control, image capture&process, image browse
image measurement and analysis.RisingView is born with the following features:
1.User-friendly UI design
2.Professional Camera Control Panel
3.Practical functions with good result Image
4. So many measurement toolsMeasurement results can export to Excel list
5. Powerful compatibility
RisingView can support Windows XP/Vista/7/8/10 system
RisingCam provide RisingView software for MAC and Linux OS
RisingView for MAC and Linux System
Sample pictures  Camera with RisingView software
Monochrome Photo
Fluorescent Photo
Darkfield Photo
BrightField Photo
PCB Photo
Metallurgical photo
Camera Size
The MTR3 Camera body, made from tough, alloy with CNC technique, ensures a heavy duty, workhorse solution. The camera is designed with a high quality IR-CUT or AR to block the IR light or protect the camera sensor. The fan‘s vibration is minimized to the low level to eliminate the vibration caused imaging blur. This design ensures a rugged, robust solution with an increased lifespan when compared to the other industrial camera solutions.
Packing
Standard Package
A
Packing Carton, carton size: L:28.2cm W:25.2cm H:16.7cm  (The carton is not showed in above picture)
B
3-A safety equipment case: L:28cm W:23cm H:15cm (1pcs, 3.5Kg/ box);
C
MTR3CMOS camera
D
High-Speed USB3.0 A male to B male gold-plated connectors cable /1.5m
E
Power adapter: input: AC 100~240V 50Hz/60Hz, output: DC12 V 3A
F
RisingView software CD (Driver & software & SDK, Ø12cm)
Optional Accessory
(if buyers want get optional accessory, please contact RisingCam before place order)
H
Adjustablelensadapter
C-mount to Dia.23.2mm eyepiece tube
(Please choose 1 of them for your microscope)
108001/AMA037
108002/AMA050
108003/AMA075
108004/AMA100
C-Mount to Dia.31.75mm eyepiece tube
(Please choose 1 of them for your telescope)
108008/ATA037
108009/ATA050
108010/ATA075
108011/ATA100
J 108015(Dia.23.2mm to 30.0mm Ring)/Adapter rings for 30mm eyepiece tube
K 108016(Dia.23.2mm to 30.5mm Ring)/ Adapter rings for 30.5mm eyepiece tube
L Calibration kit 106011/TS-M1(X=0.01mm/100Div.);
--------------------------------------------------------------------
Warranty: 1 year
Warranty period: 1 year
RisingTech always do our best provide excellent Service before/after sales for all buyers.  RisingTech will provide our technical support
if buyers have any questions of camera operation.
If camera has any quality problem within warranty period and must be returned to workshop repair it, RisingTech will repair camera or replacement new camera for buyer,
RisingTech will stand freight.
If camera has quality problem out warranty period, RisingTech will repair camera for buyers too, buyer need stand freight.
If the camera is man-made damaged, no matter within or out warranty period, buyers should stand repair charges and freight.